En cours de rédaction
One of the powerful things about 3D printing is the ability to print almost anything. You’re not as limited as with traditional manufacturing practices. however, not every design is perfect for 3D printing on the first try. To ensure an easier printing process, follow these design guidelines for SLS:
If your design includes writing
- Use a Sans Serif Font like Arial. These fonts tend to be without frills and will print much clearer.
- Bold all your text You want it to stand out!
- Choose a large font size, but not too large. Keep your font sizes between 18 and 26 points.
- In your CAD program, make sure recessed text is at least 0.8mm deep and raised text is at least 0.5mm.
If your design includes circular holes
- If the hole is in vertical build orientation, the diameter needs to be at least 1.5mm.
- The diameter should be at least 2.0mm if the hole is in horizontal build orientation.
- The best resolution occurs when the part is designed with holes in vertical orientation and the surrounding area isn’t too thick.
General tips to keep in mind
- Your design’s walls need to be at least 1.0mm thick.
- If you orient thin walls for plane-by-plane building, you’ll improve the machine’s accuracy and resolvability.
- Any pins should have a minimum diameter of 1.0mm, though they can be in either vertical or horizontal build orientation.
- Gears can print extremely well if the distance between each tooth is between 0.5 and 1.0mm. You’ll also want to make sure the shaft clearance is 1.0mm.
These guidelines will help your part print well the first time. Some changes can be made after the printing using more traditional manufacturing tools. of course, if your design needs additional help, the manufacturers at NW Rapid will work with you to create the right final product you want and need. Call us today to get started on your next project, part or prototype!